Remote Monitoring Using E-Mail - D-Link GLV-540 User Manual

To receive debug messages at a remote syslog server, configure the following
values in "Debug Configuration":
Debug Mode = "Syslog"
Debug Level = "Debug"
Syslog server address = IP address or domain name of remote
syslog server
Port = remote syslog server port (default 514)
To view debug messages through the Web interface, configure the following
values in "Debug Configuration":
Debug Mode = "Web"
Debug Level = "Debug"
Access "Device Monitor->Debug Messages" link to view the debug messages
through the Web Browser.
To disable syslog set Debug Mode to "None"
Note:
An option "Save to PC" is provided to facilitate saving the debug messages
displayed on the Web to a file. This can be used to provide a file containing
debug log information while reporting issues to customer support.

Remote Monitoring using E-mail

5.1.23
GLV provides remote alarm monitoring through e-mail. Administrator can
configure an e-mail address to which e-mail will be sent for alarms occurring
at the IP Phone.
To configure remote monitoring through e-mail, one needs to login with
"Admin" privilege. The e-mail configuration can be accessed through the Web
browser at "Device Management -> Debug Setup" web page.
Note:
Please configure the "Alarm level" to filter alarms by importance or criticality.
The Alarm level configuration is available on the same web page, under the
section "Debug Configuration"
GLV-540 User Manual
41