Table of Contents
Advertisement
2 Unpacking and Installation
Open the shipping carton and carefully remove all items. In addition to this
User's Guide, make sure you have received all of the following items:
• GLV-540 IP phone
• One Ethernet cable (RJ-45)
• Handset
• Handset cord
• Power adapter (DC 5V-3A) ***
• Quick Install Guide
• Foot stand
• User Manual and QIG CD
If any item appears to be missing or damaged, please contact your local reseller.
*** Refer to Variants of GLV-540 unit and adapters.
2.1 Connecting your GLV IP Phone
Table 1 : Definition of GLV-540 connectors
PoE-SW
10/100 Mbps RJ-45 port for uplink to Ethernet.
PoE-PC
10/100
functionality)
Power Jack
5V-3A DC power port.
Headset
3.5 mm stereo phone jack for speaker.
Speaker
Headset Mike
3.5 mm stereo phone jack for mike.
Headset
Headset RJ-12 jack
Speaker & Mike
Handset
Handset RJ-12 jack
Reset
To reset the board
2.2 Installation
1. Connect the Foot Stand to the back side of the GLV-540.
2. Connect the handset to GLV-540 with handset cord.
3. Plug one end of Ethernet cable into the PoE-SW port (RJ-45) on the rear panel
of GLV-540 and the other end into a working LAN/WAN networking connection
through an Ethernet switch or hub. Led glowing Red in color indicates that
Phone is booting and after the phone comes up it indicates the status of PoE-
SW port; when this Led is Red, Ethernet is not connected and glowing Green
indicates, Ethernet is connected.
4. Optionally connect the Ethernet port labeled PoE-PC to the Ethernet port of
your PC/laptop for accessing the LAN network in switched mode.
5. Plug the power adaptor provided into an AC outlet and insert the power cord
into the connector marked "DC 5V-3A" on the rear panel of the GLV-540.
6. On power up the LED's will flicker for sometime and LCD will display
'Initializing' message till the phone is ready for use. Lift the handset and listen
for the tone, a tone on handset speaker indicates the GLV-540 has been
Mbps
RJ-45
port
for
GLV-540 User Manual
connecting
to
PC.
(switch
9
Advertisement
Table of Contents
