Table of Contents
Advertisement
User Mode
5.1.2
GLV-540 can operate in any one of the following modes:
Single User Mode
o
Multiple User Mode
o
Single User Mode: In this mode only one User profile can operate at a time.
Only one user profile can have user status as AVAILABLE and the same user
will be the default/current user. Calls can be initiated and received only for
the default user. All other users will be having user status as UNAVAILABLE.
Multiple User Mode: In this mode GLV can be used by more than one user
profile simultaneously. Multiple user profiles can have user status as
AVAILABLE and one of the AVAILABLE users can be set as default/current
user. Calls can be initiated and received for all user profiles that have user
status AVAILABLE.
User Status
5.1.3
A configured user profile can be used only if its user status is "AVAILABLE".
User status can have either of the following values:
"AVAILABLE": user profile with user status "AVAILABLE" can be used
o
to initiate and receive calls. Phone will initiate SIP registration for
"AVAILABLE" users only.
"UNAVAILABLE": user profile with user status "UNAVAILABLE" cannot
o
initiate or receive calls.
User Status of a user profile can be modified either through Web or LCD
interface. Logging into a user profile through the LCD will update user status
to "AVAILABLE". Similarly logging out of a user profile through LCD changes
the user status to "UNAVAILABLE".
Note:
Logging in through Web browser does not change the user status. To change
user status through the Web, update user status field in "User configuration"
web page and save the phone configuration.
Default User
5.1.4
One of the configured user profiles needs to be set as the default/current user
profile. All outgoing calls will use default/current user profile. All information
displayed on the LCD will be with respect to Default user profile, i.e. Phone
book, speed dial etc.
For example: Consider a user profile "user 1" as the default user profile, it is
associated with SIP account "Account 1". When any line (L1/ L2 / L3) is
selected, then the call is made using the SIP server configured in SIP account
"Account 1".
To set the default/current user profile:
Press the "USER" key on the keypad, when the phone is idle (not in
o
call) and the handset is on-hook.
Select a user profile from the list of Users displayed on the LCD.
o
Enter the selected user profile password to confirm the selection of the
default/current user profile.
Note:
Selecting a user profile as default/current user will automatically set the
corresponding user status to "AVAILABLE"
GLV-540 User Manual
32
Advertisement
Table of Contents
