Registration Card. If a Registration Card for the product in question has not been returned to a D-Link office, then a proof of purchase (such as a copy of the dated purchase invoice) must be provided when requesting warranty service.
THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD. IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS, COST OF COVER OR OTHER INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT THE INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE OR INTERRUPTION OF A D-LINK PRODUCT, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY.
This manual describes the D-Link DPH-100 IP (Internet Protocol) telephone and explains how to configure and operate it. The DPH-100 is a fully featured IP telephone that allows both business and residential customers to benefit from IP telephony services. It reduces costs by providing access to local and long-distance voice and data services over a single network connection.
DPH-100 IP Phone ♦ Remote software upgrade support ♦ Visual status indicators ♦ Communication interface: LAN jack: RJ-45 for Ethernet (MDI-II) PC jack: RJ-45 for Ethernet (MDI-X) ♦ Communications protocols: TCP/IP, UDP ♦ Voice compression: complies with G.711 µ-law, G.711 A-law, G.723 and G.729 ♦...
DPH-100 IP Phone !"#$% Figure 1 The Parts of the Phone HOOK Switches the phone on/off hook. SWITCH LCD Screen Presents on-line messages and configuration settings. HOLD ON when the HOLD function is in effect. INDICATOR FUNCTION Selects configuration menus.
DPH-100 IP Phone REDIAL Dials the last number you called. MEMO Shifts the state to editing the name and number of the Speed Dial and Address Book, or stores the configuration in non-volatile memory. MUTE Turns sound pickup off and on.
DPH-100 IP Phone Figure 3 Connectors POWER Power adapter receptacle. 10/100BASE-TX LAN to ITSP Internet ETHERNET connection. 10/100BASE-TX connection to PC. ETHERNET...
DPH-100 IP Phone
""#$ The following are steps to install and power on your DPH-100 IP phone. 1) Plug the RJ-45 Ethernet cable into the LAN jack. 2) Plug the power adapter into the appropriate wall outlet. 3) Plug the power adapter plug into the power jack (DC 12V/1A).
In order to use a Web browser to configure the DPH-100 IP phone, you must make sure the phone has a valid Ethernet connection to a PC or LAN via its Ethernet port. We recommend using a recent version of any widely used browser.
DPH-100 IP Phone This is the main page of the phone's embedded Web-based configuration utility. This page shows you a welcome message and information about the phone for your reference. There are three choices for you on this page: Download, Configuration and Reset.
DPH-100 IP Phone H.323 Configuration Page On this page you can set network, security, H.323, CODEC and clock configuration according to your requirements. After completing configuration, you must choose the Save button to store the settings in the phone's non-volatile memory, then reset the phone to activate the new configuration.
DPH-100 IP Phone Network Configuration Page This is the IP phone network configuration web page. On this page, you can set the network parameters according to your network environment. These include the DHCP option and fixed-IP address/subnet/gateway settings. After adjusting the settings, you must click the Save button to save your new configuration.
DPH-100 IP Phone Security Configuration Page This is the IP phone's security password configuration page. You can set a password to protect your IP phone's configuration from unwanted tampering by other users. After changing the setting, you must click the Save...
• Dial Plan: The DPH-100 allows provisioning of the dial plan via a Web browser. A dial plan gives the unit a map to determine when a complete number has been entered and should be passed to the gatekeeper for resolution into an IP address.
DPH-100 IP Phone AUDIO/CODEC Configuration Page This is the codec (compression/decompression) configuration page. You can select the voice codecs G.711 µ-law, G.711 A-law, G.723 and G.729 on this page. After configuration, click the Save button.
DPH-100 IP Phone Clock Configuration Page This is the clock configuration page. You can specify an NTP (Network Time Protocol) server, select the time zone of your region, and enable or disable adjustment for Daylight Savings Time to ensure that the phone displays the correct local time.
DPH-100 IP Phone Download Page This page is used to upgrade the phone's H.323 application software image. When you click this page's single button, you will be taken to the TFTP download page, and the phone will be restarted in download mode (see...
DPH-100 IP Phone This is the TFTP download page. Both of the input boxes on this page must be filled in for the TFTP download function to work. • TFTP Server: This is the IP address of the TFTP server where the application software image (also known as the "runtime file") is located.
DPH-100 IP Phone Reset Page This is the IP phone reset system web page. You can reset the IP phone device through the web browser by clicking the “Reset” button. &%#%%)*$$+ After power is applied, the LCD panel will display the time on the first line and the phone's name on the second line.
DPH-100 IP Phone Fixed IP Address IP Address <Enter a.b.c.d> Subnet Mask <Enter a.b.c.d> Gateway IP <Enter a.b.c.d> DNS Server IP <Enter a.b.c.d> DNS Host <Enter string> DNS Domain <Enter string> Security Configuration New Password <Enter number> <1~8 digits> Confirm Password <Enter number>...
DPH-100 IP Phone (To activate the keypad configuration menu, press button <FUNCTION>.) 1. FUNCTION: Inactivate configuration menu. 2. MEMO: Store configuration back to the Flash. 3. FLASH: Clear user input string and reset the cursor to the beginning. 4. DELETE: Delete user input character; same as <Back Space>.
DPH-100 IP Phone
+ 1. The IP phone remembers the last phone number dialed. 2. To dial the same number again, off-hook the handset or press Speakerphone button, listen for a dial tone, and then press the REDIAL button.
DPH-100 IP Phone Editing Speed Dial Addresses Select Index Key[1~10] Edit Name MEMO [1~10] Edit Number [1~10] MEMO Edit Speed Dial Address Book...
DPH-100 IP Phone 1. Disables the voice packet transmission to the phone's network interface. 2. To enable/disable MUTE, press the MUTE button during a call.
, 1. Flash to transfer the call 2. To transfer the call, simply press the FLASH button.