BASE STATION
Figure 1-4 Base Station Mounting Dimensions
Base Station Desk Mount
1-6
3. Insert the mounting screws into the anchors, leaving about ¼ inch
(6.4 mm) of space between the screw head and the wall.
4. Connect the Ethernet cable and route the cord as shown.
5. Place the base over the screw heads and slide it down into place.
The base station can be placed on a desk or shelf.
1. Attach the Base Station Desk Stand. Refer to
2. Connect the IP cable. Refer to
Base Station Desk Mount
Figure
1-1.
Figure
1-4.
IP4100 Install Sept., 2013