Base Station Wall Mount - Toshiba IP4100 Installation Manual

BASE STATION

Base Station Wall Mount

IP4100 Install Sept., 2013
to the network. After the base station successfully initializes and
connects to the network, the LED lights green and remains steady on.
Figure 1-3 Base Station Cable Connection
Table 1-3 Base Station Status LED
LED Color State
Color State
Green Flickering
Green Steady on
N/A Off
Orange Briefly on
Orange Flickering
Red Blinking
Red Blinking
Red Briefly on
Red Flickering
Red Steady on
Be sure the wall material can hold the weight of the base station.
1. Hold the base in its final location and mark the screw location based
on the measurements shown.
2. Insert the appropriate anchors for the wall material.
Base Station Wall Mount
Meaning
Meaning
Firmware update in progress
All operations normal.
No power in unit or, Initializing and
connecting to the network.
Powering on
Firmware update in progress
Factory reset warning. A factory reset has
been initiated or is in progress.
No Ethernet connection available or,
Handset registration failed.
Reboot to start after firmware update.
Firmware update in progress.
Critical error. Contact technical support.
1-5