Register Handsets To Extensions; Extensions Screen, No Handsets Registered; Extensions Screen, One Handset Registered - Toshiba IP4100 Installation Manual

REGISTER HANDSETS TO EXTENSIONS

REGISTER HANDSETS TO
EXTENSIONS
Figure 1-14 Extensions Screen, No Handsets Registered
Figure 1-15 Extensions screen, one handset registered
1-20
In a multi-cell system, you can register the handsets to extensions from
any base station. When a handset is moved into another base station's
range, it will automatically update its registration to the new base station
after five to seven minutes.
1. On the Extensions screen, click the box beside the extension you
want to register. You can only register one extension at a time.
2. Click Register Handset(s) to put the base station into registration
mode. The base station will remain in registration mode for 5 minutes.
3. On the handset, press Menu to open the menu screen.
4. Select Connectivity and then select Register.
5. When prompted, enter the base station registration Access Code.
(The Access Code is 0000.)
6. Press the OK soft key to confirm.
7. Within a minute, the base station configuration screen will update with
the new information.
8. Verify that the Extension and Display Name are correct and that the
State shows SIP Registered.
9. Make a quick test call to verify the handset is correctly registered.
10. Repeat the process for each extension.
Delete extensions
IP4100 Install Sept., 2013