Base Station Configuration; Chapter 3 - Software Reference; Available Screens - Toshiba IP4100 Installation Manual

Chapter 3 – Software Reference
BASE STATION
CONFIGURATION

Available Screens

Screen
Home/Status Return to the home screen.
Extensions Programming extensions and handsets.
Servers Provisioning IPedge or Strata CIX systems.
Network Configure how the base station communicates with the network.
Management Change the base station name and configure SIP and system logs.
Firmware Update Configure remote firmware updates for base stations and handsets.
Time Configure the NTP Time server used for synchronization and system time stamps.
Country Specify the country or territory where the system is located.
Web Security Change the user name and password used to access the base station web server.
Central Directory Upload a CSV file containing a central directory list.
Multi cell Configure base stations to operate in a multi-cell chain.
Configuration Display complete settings for the base station and the servers it relies on. You can
copy these settings to create a configuration file.
Syslog Review system level messages of the current base station.
SIP Log Review IPedge or Strata CIX system related messages to and from the current
base station.
Logout Exit the base station configuration interface.
IP4100 Install Sept., 2013
1. To open the configuration interface, open a web browser window and
enter the IP address of the base station you want to configure in the
address bar.
2. When prompted, enter the user ID and password. The default user ID
and password are both admin (all lower case).
3. The base station opens the Home/Status screen and displays the
values specific to this base station.
You can open any configuration screen by clicking its name on the left
side of the screen; the screen name links appear on every screen.
Purpose
3-1