Management Settings Parameters - Toshiba IP4100 Installation Manual

BASE STATION CONFIGURATION
Table 3-13 Management Settings Parameters
Parameter
Base Station Name
Configuration
Server Address
Management
Transfer Protocol
HTTP Management
upload script
HTTP Management
password
Upload of SIP Log
Trace Server
Trace Server IP
Address
Syslog Server IP
Address
Syslog Server Port
Syslog Level
IP4100 Install Sept., 2013
Enter the name you want this base station to display at the top of the
interface screens.
Enter the IP address or URL of the server that hosts the uploaded
SIP log files. Base station configuration file(s); base stations will
upload log files to the same server.
Note: This server must be available to the base stations when the
Upload of SIP Logs is enabled.
Select the protocol used for the configuration files and firmware
downloads. The default value is TFTP.
(for development purpose only)
(for development purpose only)
Select Enabled to have this base station copy low-level SIP debug
messages onto the configuration server. SIP logs are named in the
format of {MAC_address}_SIP_{timestamp}.log. Unless you are
troubleshooting a specific problem, leave this log disabled.
(for development purpose only)
(for development purpose only)
Enter the IP address of the server you want the base station to
upload Syslogs to.
If your syslog server is listening to a port other than 514 (the
default), enter that port number.
Select the level of messages you want the base station to log:
• Disabled: the base station will not log any messages to the
server.
• Normal Operation: Normal operation events are logged,
incoming call, outgoing calls, handset registration, DECT
location, and call lost due to busy, critical system errors, general
system information. The Syslog Level should be at this setting.
The intended audience is Level 1 or 2 technical support.
• System Analyze: Handset roaming events are logged at this
level plus Normal Operation logs. The intended audience is
Level 1 or 2 technical support.
• Debug: Low level debug logs plus System Analyze logs. The
intended audience are system developers.
Description
Network Screen
3-11