Table of Contents
Advertisement
INSTALLATION
SETTING UP THE BASE UNIT (DESK TOP MOUNTING)
For setting up the base unit follow the instructions below.
Snap the bracket's tab into the notches on the base.
Raise the
antenna to
vertical
position.
• Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-1981 power source
AC 120V 60Hz/DC9V).
• Connect the AC adaptor to a continuous power supply.
AC ADAPTOR INFORMATION
Use only the supplied AC adaptor, or
one matching its specifications exactly
with this product. Incorrect voltage may
damage the unit or cause it to function
improperly.
10
Fasten the AC
adaptor cord to
prevent it from being
disconnected.
Telephone Line Cord
AC Adaptor
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120 V, 60 Hz)
Advertisement
Table of Contents
