BASE STATION CONFIGURATION
Table 3-2
Home/status Parameters
Item
System Information
Phone Type
System Type
RF Band
Current Local Time
Operation Time
RFPI-Address
MAC-Address
IP-Address
Firmware Version
Firmware URL
SIP Identity Status
on this Base station
Extensions Screen
IP4100 Install Sept., 2013
Table 3-1
Home/Status Options
Button or Option
Reboot
Forced Reboot
The current multi-cell state of this base station (Multi Cell Disabled or
Ready; Primary or Secondary).
Always IPDECT, a combination of VoIP and wireless DECT technology.
The signalling protocol used to communicate with the IPedge or Strata
CIX system.
The DECT radio band currently in use by this base station.
The current time and date received from the time server.
The amount of time since this base station was last rebooted.
The address assigned to the DECT radio of this base station.
The address assigned to the Ethernet connector of this base station.
The current IP address assigned to this base station.
The version of the current firmware on this base station.
The address of the server this base station uses for firmware updates.
The status of all handsets registered to this base station, in the format
{Extension}@{IP address of the IPedge or Strata CIX system}.
Function
Reboot the connected base station. If there are any
active calls on the base station, it will not reboot.
Disconnect any active calls and reboot the connected
base station.
Definition
Extensions Screen
3-3