Servers Screen - Toshiba IP4100 Installation Manual

BASE STATION CONFIGURATION
Figure 3-1 Servers Screen
Table 3-6 Servers Options
Option
Add Server
Remove Server
Table 3-7 Servers Parameters
Parameter
NAT Adaptation
Registrar
3-6
Provision a new IPedge or Strata CIX system for the IP4100 system.
Remove the selected SIP server from the system.
• If you want the base to change the report and received parameters
in its outgoing SIP messages according to the parameters in
incoming SIP messages received from the IPedge or Strata CIX
system, select Yes.
• If you want the base to ignore the report and received parameters in
SIP messages received from the IPedge or Strata CIX system, set
this field to No
Enter the IP address of the SIP server (IPedge or Strata CIX system)
optionally followed by the port number you want the base to use. Use
one of the following formats:
• IP address (e.g., 192.168.0.1
• {IPaddress}:{port} (e.g., 192.168.0.1:5060)
(Sheet 1 of 2)
Add Extension and Edit Extension
Description
Description
IP4100 Install Sept., 2013