Chapter 2 - Configuration For Ipedge; Ipedge Configuration; License Requirements; Conference Support - Toshiba IP4100 Installation Manual

Chapter 2 – Configuration for IPedge

IPedge CONFIGURATION

License Requirements

Conference Support

BASE STATION
CONFIGURATION
IP4100 Install Sept., 2013
IP4100 telephones are programmed in the IPedge database as SIP
stations. Each IP4100 handset is a station.
Each IP4100 SIP telephone requires a SIP Endpoint User License (ICP-
USR-EC, I-CP-USR-EM or I-CP-USR-EP). The IP4100 Base Stations do
not require a user license.
IPedge systems running R1.5 and later software support multiple SIP
channels per station, this allows the IP4100 to receive a call (call waiting
notification) when it is already on a call. In Enterprise Manager select
Station > Station Assignment. Select the SIP station DN and edit. Click
on the Show advanced configuration link. Set the SIP Channels
parameter to 2 then, click on the Save icon. Additional licenses for the
additional SIP channels are not required.
In the IP4100 base you can do a forced reboot and this
Important!
will allow all handset to re-register with the 2 SIP
channels without having to touch every handset.
When the handset comes up it will register with the
system and have the capability to receive a second call.
The software profile of the IP4100 base station must be changed to
support the IPedge R1.5 conference features. Use the following
procedure.
1. Determine IP address of IP4100-Base by using an IP4100-DECT
handset IP Search Tool. To select Menu *IP* press the Menu key
then the * 4 7 * keys.
2. Login to IP4100-Base web configuration GUI via a PC web browser
(Ex. http://192.168.10.32).
3. Click on the Servers Page and click the appropriate Server (Server
1:<IP address>).
4. Change the PBX type. Click on the drop down arrow in the PBX field
then, select IPedge.
2-1