Change Default Password; Web Security Screen - Toshiba IP4100 Installation Manual

GENERAL SYSTEM CONFIGURATION

Change Default Password

Change PSTN Tones and
Emergency Dialing
IP4100 Install Sept., 2013
included are incoming call, outgoing call, handset
registration, DECT location, firmware updates, call lost due to
busy, critical system errors, and general system information.
Select this level during system configuration unless
requested by a technician to select one of the other levels.
• System Analyze: This will output normal operation event
logs plus more technical logs. This level of logging is targeted
for a level 1 or 2 tech support.
• Debug: This will output the previous two types of logs plus
lower level logs whose audience are system developers.
Please be aware that enabling this level of logging will
degrade system performance.
9. Click Save when you are finished.
In the left panel of the Home/Status screen, select Web Security. This
opens the Web Security screen. Enter a new username and password,
then click Save.
Figure 1-9 Web Security screen
Be sure to keep track of the new user name and password according to
your organization's procedures.
If the system connects to the PSTN in the US or Canada, skip this
section.
1. In the left panel of the Home/Status screen, select Country. This
opens the Country screen.
2. Select the country that best represents the PSTN standards the
system should use.
3. Click Save & Reboot. When the base station finishes rebooting, the
interface will use the new language.
Change Default Password
1-13