GENERAL SYSTEM CONFIGURATION
Configure the Network
Settings
1-14
1. In the left hand panel, select Network. This opens the Network
screen.
Note:
Toshiba recommends using static IP addresses.
Figure 1-10 Network Settings Screen
2. Enter the correct settings for your network and click Save. Refer to
Chapter 3 – Software Reference
these fields.
3. Normally, you need to reboot the base station to activate new network
settings. However, during initial configuration, wait until you configure
the rest of the screens before rebooting. (Changing the Time
Settings, for instance, will force a reboot.)
Configure the Network Settings
if you need more information on
IP4100 Install Sept., 2013