Controls And Indicators; Select Pushbutton; Leds - AMX SDX-510M-DX Instruction Manual

Device Connectors

Controls and Indicators

The following sub-sections describe each component on the front panel of the switcher. Refer to FIG. 2 on page 13 for
the component layout of the front panel.

SELECT Pushbutton

Press the SELECT pushbutton to manually switch the input routed to the output. Each press switches to the next input in
order, or if the last input is currently selected, switches to the first input. The pushbutton features an POWER LED which
indicates the switcher is powered on.
FIG. 4 displays the SELECT pushbutton.
FIG. 4 SELECT Pushbutton

LEDs

The LEDs on the front panel indicate the communications status of several different connections. All Solecis Digital
Switchers feature STATUS, LINK/ACT, and AXLINK KEYPAD LEDs. The SDX-410-DX and SDX-810-DX also
feature SELECT, HDCP, and ACTIVE LEDs for each available input on the switchers.
FIG. 5 displays the front panel LEDs on the SDX-410-DX.
FIG. 5 Front Panel - LEDs (SDX-410-DX)
The following table provides the details for each LED on the switchers:
Front Panel LEDs
Label
STATUS
LINK/ACT
AXLINK KEYPAD
The following LEDs are only available on the SDX-410-DX and SDX-810-DX:
SELECT
HDCP
ACTIVE
14
Color Description
green Indicates the boot and connection status.
green Indicates communication status. This LED also blinks when receiving
data.
green Blinks to indicate the status of the AxLink Keypad port (located on the
rear panel of the device.)
• Off - No power, or the switcher is not functioning properly.
• 1 blink per second - Normal operation.
• 3 blinks per second - AxLink bus error. Check all AxLink bus
connections.
green Indicates which video input is currently routed to the video output.
yellow Indicates that the source video is encrypted.
green Indicates that a video signal is present.
Instruction Manual - Solecis Digital Switchers