Wiring Specifications; Overview; Port Pinouts And Wiring Specifications; Hdmi Inputs - AMX SDX-510M-DX Instruction Manual

Wiring Specifications

Overview

This chapter provides the port pinouts and wiring specifications (when applicable) for each port on the front and rear
panels of the Solecis Digital Switchers.

Port Pinouts and Wiring Specifications

The following sub-sections describe the wiring for each port on the SDX switchers. Refer to the Device
Connectors section on page 13 for the component layout of the switchers.

HDMI INPUTS

The HDMI INPUT connectors on Solecis Digital Switchers are used to connect source input devices to the device. The
switcher routes digital video and audio from connected source input devices to the connected output devices. These ports
support HDMI (with 3D and Deep Color) and HDCP.
The following table describes the pinout configuration of the HDMI INPUTS connectors:
HDMI INPUT Connectors - Pinouts and Signals
Pin Signal
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
FIG. 19 displays the pin locations for the HDMI INPUTS:
FIG. 19 HDMI pinouts
To connect HDMI input source devices (DVI and HDMI) to the HDMI INPUT connectors, the following (optional)
adapter cables are required:
DVI Input Adapter Cables
Name
HDMI Interface
Cable
HDMI to DVI Cable
Instruction Manual - Solecis Digital Switchers
Pin
11
12
13
14
15
16
17
18
19
Description
HDMI Male to HDMI Male
HDMI Male to DVI Male
(See the DVI Pinout for DVI-to-HDMI Cable
Adapter section on page 22 for more information on
DVI-to-HDMI cable wiring.)
Signal
TMDS Clock Shield
TMDS Clock-
CEC
Reserved, HEC Data
SCL
SDA
DDC/CEC/HEC Ground
+5V Power (max 50mA)
Hot Plug Detect, HEC Data+
Length
6 1/2' (2m)
6' (1.828m)
Wiring Specifications
FG#
FG10-2178-05
FG10-2179
21