Front Panel Controls And Indicators; Leds; Lcd Display - AMX Enova DVX-3150HD Operation/Reference Manual

Front Panel Controls and Indicators

The following sub-sections describe each component on the front panel of the DVX. Refer to FIG. 3 on page 9
for the component layout of the front panel.

LEDs

The LEDs on the front panel (FIG. 6) indicate the communications status of several different connections, as
described in the table below:
LINK/ACT LED
FIG. 6 Front Panel - LEDs
Front Panel LEDs
Label
LINK/ACT
STATUS
INPUT
OUTPUT
RS-232/422/485 (1-6)
RELAYS (1-8)
IR/SERIAL (1-8)
I/O (1-8)

LCD Display

During normal operation, the 2 x 20 line LCD display (FIG. 7) indicates output volume information. The LCD
backlight on the display turns off after 35 seconds of inactivity.
FIG. 7 LCD display
The LCD Display also displays VIDEO menus (Video Output and Video Input), AUDIO menus (Audio
Output, Audio Input, and Mic Input), SWITCH menu, and STATUS menu selections (see the Audio/Video
Configuration section on page 45 for more information), and indicates current status of any adjustments made
to settings within these menus.
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Status LED
Output LED
RS-232/422/485
Input LED LEDs
Color Description
green Blinks when receiving LAN data packets.
green Blinks to indicate that the system is programmed and communicating
properly.
yellow Blinks to indicate that the Controller is receiving data.
red Blinks to indicate that the Controller is transmitting data.
red/yellow 6 sets of LEDs indicate that RS-232/422/485 Ports (1-6) are
transmitting or receiving data.
• Red = transmitting data
• Yellow = receiving data
red Lights to indicate that one or more of the relay channels (1-8) of port 8
are currently active (closed).
red Lights to indicate that one or more of the IR/Serial channels (1-8) of
ports 9-16 are currently transmitting control data.
yellow Lights to indicate that one or more of the I/O channels (1-8) of port 17
are currently active.
Wiring and Device Connections
Relay IR/Serial
LEDs
LEDs LEDs
I/O
11