Table of Contents
Advertisement
Device Configuration and Control
Issuing controls to a centrally located IR device
The UDM hub needs to learn the device's IR protocol i.e. which button on its remote
performs which function. Refer to the Protocols and IR Learning section of this
manual.
1. The control bar at the bottom of the browser screen enables specific controls to be executed via the
browser connection(FIG. 32).
FIG. 32
Command bar for issuing commands to a Device
2. Select the control(s) to be performed for this device. Two controls can be issued to a device 1
nd
2
(FIG. 33).
FIG. 33
Optional controls for a device
The first command is limited to Power On, Off and A/V Select.
3. Click the tickbox beside the relevant device to select the device to be sent a control. It will highlight
in orange.
4. Click on Send to Included to send the control to the device.
5. Alternatively such controls can be scheduled to occur later. Refer to the Scheduling Events section
on page 43 for details.
Custom Controls
Custom Controls permits the Administrator to specify custom IR controls which can sent to the device or
display. A list of custom controls and their IR value can be found in Appendix A of this guide.
To issue a custom control;
1. Select the custom option within the 2
2. Type in the value of the IR code which is to be sent in the relevant box.
3. Execute the custom control or schedule it to occur later.
30
nd
list of commands.
UDM-1604 Endeleo Multi-Format Distribution Hub
st
and
Advertisement
Table of Contents
