Dxlink Output; Twisted Pair Cable Pinouts - AMX SDX-510M-DX Instruction Manual

Wiring Specifications

DXLink OUTPUT

One DXLink (RJ-45) connector transports digital video, embedded audio, Ethernet, and bi-directional control over
twisted pair cable to DXLink devices or boards, including digitally transcoded analog video signals. The DXLink output
supports HDCP.
Note: The DXLink output on the SDX-510M-DX provides Power Over DXLink to compatible DXLink Receivers so they
do not need local power at the display or projector.
FIG. 23 displays the DXLink output.
FIG. 23 DXLINK OUTPUT
See the Important Twisted Pair Cabling Requirements and Recommendations section on page 25 for information about
cable requirements for these ports.

Twisted Pair Cable Pinouts

AMX supports both the T568A and T568B pinout specifications for termination of the twisted pair cable used between
the switcher and the DXLink receiver.
FIG. 24 displays the twisted pair pinout specifications for the DXLink input.
FIG. 24 Twisted pair cable pinouts for T568A (recommended) and T568B specifications
24 Instruction Manual - Solecis Digital Switchers