Leica GS50 User Manual page 43

3.4.2 Satellite based Landstar System (RTS), contd.
The LandStar service is subject to a
service charge which varies from
country to country. The end user is
required to complete a Subscription
Agreement before the service can be
activated.
For more information, users
are referred to the LandStar
WWW site: www.thales-
landstar.com
The GS50 / GS50+ has a default
configuration set to be used for the
LandStar service. After installing the
Real-Time Satellite (RTS) module,
choose the RACAL configuration set
from the DATA COLL/Begin panel.
By default, the unit will begin to track
LandStar satellite signals using an
automatic search algorithm. You can
manually tune the RTS module by
pressing the CONFIG key and
choosing the Interfaces option. F5
CTRL will allow you to manually
enter the RACAL satellite frequency
you wish to track.
GS50 / GS50+-4.0.0en
To change the pre-transformation of
datum to the given datum of the
public reference system open the
CONFIGURATION / Racal panel and
select the right Transformation.
43
Your Leica GS50+ is capable to work
as a RTK system. For the use of
RTK system you need an additional
Radio that receives online correction
signals from a Reference station.
Note that only the GS50+ can work
as a RTK system because of its dual
frequency capability. To set up your
GS50+ as a RTK system please
refer to the System 500 technical
reference Manual that will guide you
through the configuration.
Real Time Differential Options