Leica GS50 User Manual page 38

3.3.3 QuickStart Tutorial- GIS Navigation/Update, contd.
Step 3: Setting your reference
mark (NAVIGATION\)
You should now be in the main
navigation panel.
The GS50 / GS50+ will allow you to
orient your target point with respect
to the sun, last point, known point,
line or North or a direction arrow.
When using the direction
arrow, the user must be in
motion for the sensor to correctly
orient.
To choose your orientation:
1. Highlight the Orient field and press
ENTER.
2. Select your reference mark from
the listbox and press ENTER.
Getting Started With New Equipment
Step 4: Navigating to a waypoint
(NAVIGATION\)
1. Highlight the waypoint list field and
press ENTER.
The following panel should appear.
The waypoint listbox will display the
waypoint number on the left and the
attached code on the right.
38
2. Highlight the desired waypoint and
press ENTER.
After selecting the waypoint and the
reference mark, one of two panels
will be shown. If you are further than
100m the waypoint, you will see the
macro navigation panel.
Applicable for the Arrow
orientation.
The macro-navigation panel displays
the reference mark as a triangle, the
target as a circle and your position
as a cross-hair at the center of the
circle.
GS50 / GS50+-4.0.0en