Leica GS50 User Manual page 27

3.3.2 QuickStart Tutorial - GIS Data Collection, contd.
Copy the CXT File to your PC Card
in the Folder CODE and use the
sensor transfer, 05 codelist and F6
More to transfer the CXT to your
sensor.
After transferring the CXT file to the
sensor the choice list is available for
the attribute.
Select the Code with the CXT cre-
ated choice list and press F5 LIST in
the ATTRIBUTION panel to display
the choice list. To select a value
toggle with the up and down key
between the different values and
select the right value with ENTER.
To create a choice list in the field,
enter the New Attribute panel and
create a new attribute. Set a default
value to the attribute and LIST F6 will
appear. LIST F6 allows you to create
a choice list.
GS50 / GS50+-4.0.0en
To fill the choice list with values
change to the ATTRIBUTION panel,
highlight the attribute and press
ENTER. Type in a new value and
add the value with ADD F2.
Use the CXT choice list when you
need more than 14 values for a
attribute in the choice list.
27
Please note that the
following attribute names
are reserved for internal
use and should not be created in
the field:
NAME, COLOR, Z, OrZ, STYLE,
FONT, SYMBOLSIZE, ROTATION,
IT_KEY, IT_RECNO, IT_EDIT,
IT_GEONM, IT_GEOID, IT_STATUS,
IT_STIME, IT_OCP, IT_STD,
IT_PDOP, IT_ANTHGT, IDX_CODE,
IDX_INDEX
Getting Started With New Equipment