Leica GS50 User Manual page 25

3.3.2 QuickStart Tutorial - GIS Data Collection, contd.
Now all required settings for a typical
data collection session are made.
The Data Coll \ Begin panel looks the
following:
Pressing F1 CONT finishes this start-
up sequence.
Please Note that the
Antenna setting appears
only in Advanced mode and can only
be changed in the configuration set.
GS50 / GS50+-4.0.0en
Step 5: Selecting or creating
codes for data collection (FEA-
TURING\)
You are now in the FEATURING\
panel. This panel allows you to
select or create codes for data
collection. Codelists can also be
created using the Codelist Manager
module within the GIS DataPRO
software.
If in the previous step you selected
an existing codelist, a number of
codes should appear in the codelist
box. If you created a new codelist in
the previous step, this listbox should
be empty.
25
Creating codes
If your codelist contains no codes,
your codelist menu box should look
like this:
Press F2 C-LST to change to the
CONFIGURE \ Coding panel and
Press F3 CODES followed by F2
ADD to create a new Code.
Use the right or left cursor key to
choose the code type (point, line, or
polygon). Enter the name of the
code, and a note about the code
(optional), in the appropriate input
fields.
Getting Started With New Equipment