Leica GS50 User Manual page 35

3.3.2 QuickStart Tutorial - GIS Data Collection, contd.
Line Segmentation
While collecting line data, it is possi-
ble to segment the line to enter
different attributes without stopping
collection.
• Press Shift, then F5 SEG and
you will be promted to enter
information corresponding to
the attributes of the new
segment.
Segmentation does not
currently support offset data.
GS50 / GS50+-4.0.0en
Step 9: Ending data collection
You can now quit the data collection
panel by pressing SHIFT F6 QUIT.
This brings you back to the main
menu.
Pressing SHIFT F6 will
always allow you to termi-
nate data collection, even during a
site occupation. In this case you will
loose all data collected since press-
ing OCUPY.
As soon as you are back to the main
menu, the PC-Card may be re-
moved. The PC-Card icon will
contain a down arrow, indicating that
it is ok to remove the PC-Card.
35
You can now switch off the sensor.
Once power is off disconnect all
cables and put all equipment back
into the shipping case.
Getting Started With New Equipment