Leica GS50 User Manual page 23

3.3.2 QuickStart Tutorial - GIS Data Collection, contd.
You can now enter a name for a new
job; press ENTER upon completing
the input of the name. Input fields for
description and creator are optional
and can be left blank.
As an example we can create a new
job called "Test":
By default the new job will be stored
on the PC-Card. You can change the
storage location to the internal
memory by toggling the Device input
field to Internal.
Pressing F1 CONT will confirm the
creation of a new job name. Press
ESC if you want to leave this field
without creating a new job. Pressing
F6 QUIT has the same effect.
GS50 / GS50+-4.0.0en
After pressing F1 the list of available
jobs is updated and now also shows
the job "Test":
Now press F1 CONT to confirm the
selection of the newly created job.
23
Step 4: Choosing your codelist
(DATA COLL \ Begin)
A codelist is simply a list of codes or
features. Codes are the building
blocks of the codelist and may be
thought of as features.
Codelists are selected in the usual
way: first use the cursor down key to
get this input field highlighted. Then
use the cursor left key to toggle
among the several options until the
correct one appears. Alternatively
you can press the ENTER key to get
a listbox from which the choice can
be made, or a new codelist can be
created.
Please note that you must
select a codelist in order to
collect data.
Getting Started With New Equipment