Leica GS50 User Manual page 16

3.3.1.1 Icon Explanation, contd.
No. Visible Satellites
The number of theoretically visible satellites according to
the current almanac is displayed. This number depends
on the last computed position within the receiver, and the
current almanac.
No. Satellites used on L1/L2
When an Accuracy Status icon is displayed, the number
of satellites currently used for the position computation is
shown. Satellites that are tracked with a poor signal
quality are not shown.
When no Accuracy Status icon is displayed the number
of tracked satellites are shown, irrespective of the signal
quality.
Please note that since the GS50 is an L1 code
only receiver, the number of satellites used on
L2 will be blank (-).
Getting Started With New Equipment
Radio Status
Radio Transmitting (blinks)
Radio Receiving (blinks)
If two radio modems are being used simultaneously, the
icon will alternate between each modem.
GSM Status
The GSM phone is connected to the network.
If this icon blinks, the GSM phone is either trying to
connect to or disconnect from the network.
16
GS50 / GS50+-4.0.0en