Leica GS50 User Manual page 28

3.3.2 QuickStart Tutorial - GIS Data Collection, contd.
The codelist should now look like
this:
If you create attributes for a code,
then the last column of this panel will
display what type of code it is (P-
Point, L-Line, or A-Area). You will
see the type indication in the last
column of this panel.
Getting Started With New Equipment
Selecting codes
Use the up and down cursor key to
move through the codes in the
codelist.
The field on the far right of the
codelist menu box indicates the type
of each code (point P, line L, or area
A). After highlighting the desired
code, press F1 CONT to begin data
collection. To continue our example,
select the Pole code.
28
Step 7: Logging point data
(ATTRIBUTION\)
In this step, you will collect the
spatial attribute (position information)
for your Pole (point) code.
It is time to check again the icons on
the top of the display. The position
icon should be available, the position
mode icon still indicates "moving",
the "number of satellites visible" icon
should display a number greater or
at least 4, and the number of used
satellites will generally be the same
as the number of visible satellites, if
you are in a relatively open area.
We are now in the ATTRIBUTION\
panel. For the Pole code, the panel
should look like the following:
GS50 / GS50+-4.0.0en