Table of Contents
Advertisement
User Guide
Upgrading Random Access Memory (RAM)
Recommended Memory Configuration
Refer to
"Specifications" on page 247
more information.
Checking System Memory
If you do not know how much memory is installed in your system, check the amount by
using the relevant following procedure.
1. On the Windows desktop, click on Start, and select Control Panel.
2. Click on Switch to classic view.
3. Double click on the System icon, and click on the General tab. This tab shows
the random access memory (RAM). This is the amount of system memory in
your computer.
Removing a DDR module
If your memory configuration requires the removal of a module, perform the following
steps:
1. Remove the right side door.
2. Remove the front panel.
3. Locate the memory upgrade sockets on the motherboard.
4. Press the plastic clips at the outer edge of the socket away from the memory
module. This ejects the memory module from the socket. Do not touch the
and to
Figure 28: DDR Memory Module Sample
See "Removing the Right Side Door" on page 122.
See "Removing the Front Panel" on page 125.
"Memory Configuration" on page 24
140
www.nec-computers.com
for
Advertisement
Table of Contents
