Table of Contents
Advertisement
User Guide
2. Press D on the screen shown below.
when the console redirection is used. It is safe to bypass this
issue.
3. Select [Yes] when prompted with the message [Delete Array?] and press
Enter.
Selecting [No] returns to the main menu without deleting any array.
4. Depending on your RAID level:
■ <RAID0>
■ <Other than RAID0>
Note: Some characters may not be displayed correctly
The [Deleting information] window appears, select the hard disk drive
from which you wish to delete a partition or boot block, or select [None],
then press Enter.
<Example>
Drive ID 0:Data in drive 0 is entirely erased. Data in drive 1 is reserved.
Drive ID 1:Data in drive 1 is entirely erased. Data in drive 0 is reserved.
Drive ID 0 & 1:All the data in both drives is erased.
None:Array is deleted, but the data is reserved in both drives.
The [Deleting information] window is not displayed, proceed to the next
step.
115
www.nec-computers.com
Advertisement
Table of Contents
