User Guide
Collecting Configuration Information
This section describes how to collect the information on hardware configuration and
inside specification.
In order to collect information, "Diagnostic Program" is used.
If STOP error, system error, or stall occurred, follow the proce-
dure below after restarting the system.
1. Point to [Settings] in Start menu, and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Management Tool], and double-click [Computer Management].
The [Computer Management] dialog box appears.
3. Click [System Tool]: [System Information].
4. Click [Save as System Information File] in the [Operation] menu.
5. Enter the file name to save in the [File Name] box.
6. Click [Save].
Caution
203
www.nec-computers.com