Table of Contents
Advertisement
User Guide
Enables control of the SecuRAID controller via the network. Install in one of
Express systems and management PCs that are connected through network. The
above components must be installed correctly for establishing the environment to
use Power Console Plus.
Power Console Plus components to be installed are different between the target
systems and management PC.
■ Server (system in which the SecuRAID controller is mounted):
Install the following three components in this system:
- MegaRAID Service Monitor
- MegaRAID Server
- MegaRAID Client
Start Power Console Plus of management PC, after the Power On machine that
installed "Server" and "Management Server".
Install the following component in this PC:
- MegaRAID Client
■ Management server (Machine that manages all systems that are monitored and
controlled by management PCs):
Install the following component in one of the systems or management PCs:
- MegaRAID Registration Server
System Setup
This section explains the Power Console Plus setup in the Express system in which the
MegaRAID controller is mounted.
Operating Environment
■ Hardware
- Machine: server connected with the AMI disk array controller (A)
- Memory: Size large enough for OS operation + 8MB or more
- Free space of the hard disk: 5MB or more
- Display unit: Screen size 1024 × 768 or larger
- Required peripheral equipment: Network Interface card, CD-ROM unit, Point-
ing device such as a mouse
■ Software
- Microsoft Windows XP
- Microsoft Windows 2003
166
www.nec-computers.com
Advertisement
Table of Contents
