User Guide
1394 Controller Setting (1394_EN1)
This jumper allows you to enable or disable the onboard IEEE controller. Set to pins 1-
2 to activate the controller.
Gigabit LAN Controller Setting (LAN1_EN1)
This jumper allows you to enable or disable the onboard 1 Gigabit LAN controller. Set
to pins 1-2 to activate the controller.
RAID Controller Setting (RAID_EN1)
This jumper allows you to enable or disable the onboard RAID controller. Set to pins 1-
2 to activate the controller.
Note: this RAID chipset is not used on the system.
23
www.nec-computers.com