Setting Up Your System (Tower); Setup Flow - NEC SA2500 User Manual

User Guide

Setting Up Your System (Tower)

This chapter describes how to select a site, unpack the system, make cable connections,
and power on the system units.

Setup Flow.

Select a suitable site for the system.
Unpack the system and accessories from the shipping carton box.
Connect peripheral devices to the system.
Connect the power cord to the system.
Power on the system to start software setups. Setups depend on the optional internal devices installed and
the peripheral devices connected.
If no operating system was factory-installed, install one to the server.
Install the utilities in the provided EXPRESSBUILDER CD-ROM.
After all the system setup procedures are completed, make backup copies of system information.
System information is required for recovering the system from the trouble or after replacing the system
board.
71
www.nec-computers.com
Making backup c