Table of Contents
Advertisement
User Guide
Primary IDE Slave Submenu
Feature
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Precomp.
Landing Zone
Sector
PIO Mode
UDMA Mode
Transfer Rate
S.M.A.R.T Status
Table 25: Primary IDE Slave Submenu
Choices or
Description
Display Only
Auto
When set to Auto, the hard
drive is automatically detected
None
and the BIOS fills in the correct
values for the fields below.
Manual
Set to Manual to specify hard
disk drives parameters.
Set to None if no hard drive is
installed.
Auto
Set to Auto to allow the
automatic detection of an IDE
CHS
hard disk drive.
LBA
When Primary IDE Master
(above) is set to Manual, set
Large
the relevant access mode
configuration option.
Display Only
Display Only
Display Only
Display Only
Display Only
Display Only
Auto
Sets the PIO mode for the IDE
device.
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Auto
When set to Auto, the UDMA
capability allows improved
Disabled
transfer speeds and data
integrity for supported IDE
devices.
Display Only
Display Only
214
www.nec-computers.com
Your Setting
Advertisement
Table of Contents
