Table of Contents
Advertisement
User Guide
8. If you are installing a long expansion card, make sure to secure the end
opposite the bracket to ensure that the card does not move inside the chassis.
To do so, rotate the retention tab until it locks the card into place.
Figure 29: Retention tab for Long Expansion Cards
9. If applicable, make any connections specified in the card documentation .
10. Replace the front panel.
11. Replace the right side door.
A: Retention tabs (not used)
B: Retention tab (rotated in locked position)
See "Replacing the Front Panel" on page 125.
See "Replacing the Right Side Door" on page 124.
146
www.nec-computers.com
Advertisement
Table of Contents
