The Add Trust Domain Screen - ZyXEL Communications VMG1312-B Series User Manual

The following table describes the fields in this screen.
Table 115 Maintenance > Remote MGMT > Trust Domain
LABEL
Add Trust
Domain
IPv4 Address
Delete

31.4 The Add Trust Domain Screen

Use this screen to configure a public IP address which is allowed to access the Device. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 147 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 116 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
IPv4 Address
Apply
Cancel
Chapter 31 Remote Management
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the Device from the
WAN.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
VMG1312-B Series User's Guide
267