Trust Domain; Add Trust Domain - ZyXEL Communications EX5501-B0 User Manual

Table 130 Maintenance > Remote Management > MGMT Services (continued)
LABEL
Port
Cancel
Apply

33.3 Trust Domain

Use this screen to view a list of public IP addresses which are allowed to access the Zyxel Device through
the services configured in the Maintenance > Remote Management > MGMT Services screen.
Click Maintenance > Remote Management > Trust Domain to open the following screen.
Note: If specific services from the trusted hosts are allowed access but the trust domain list is
empty, all public IP addresses can access the Zyxel Device from the WAN using the
specified services.
Figure 180 Maintenance > Remote Management > Trust Domain
The following table describes the fields in this screen.
Table 131 Maintenance > Remote Management > Trust Domain
LABEL

Add Trust Domain

IP Address
Delete
33.3.1 Add Trust Domain
Use this screen to configure a public IP address which is allowed to access the Zyxel Device. Click the
Add Trust Domain button in the Maintenance > Remote Management > Trust Domain screen to open the
following screen.
Chapter 33 Remote Management
DESCRIPTION
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes back to the Zyxel Device.
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
293