Add/Edit Port Forwarding - ZyXEL Communications VMG1312-B Series User Manual

Table 54 Network Setting > NAT > Port Forwarding (continued)
LABEL
End Port
Translation
Start Port
Translation End
Port
Protocol
Modify

11.2.1 Add/Edit Port Forwarding

Click Add new rule in the Port Forwarding screen or click the Edit icon next to an existing rule to
open the following screen.
Figure 78 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 55 Port Forwarding: Add/Edit
LABEL
Active
Service Name
WAN Interface
Chapter 11 Network Address Translation (NAT)
DESCRIPTION
This is the last external port number that identifies a service.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This shows the IP protocol supported by this virtual server, whether it is TCP, UDP, or TCP/
UDP.
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
DESCRIPTION
Clear the checkbox to disable the rule. Select the check box to enable it.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
VMG1312-B Series User's Guide
172