36.2.1 Email Notification Edit
Click the Add button in the Email Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 154 Email Notification > Add
The following table describes the labels in this screen.
Table 122 Email Notification > Add
LABEL
Mail Server
Address
Authentication
Username
Authentication
Password
Account Email
Address
Apply
Cancel
Chapter 36 E-mail Notification
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail address specified
in the Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Enter the user name (up to 32 characters). This is usually the user name of a mail account
you specified in the Account Email Address field.
Enter the password associated with the user name above.
Enter the e-mail address that you want to be in the from/sender line of the e-mail
notification that the Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated
by the mail server as well.
Click this button to save your changes and return to the previous screen.
Click this button to begin configuring this screen afresh.
VMG1312-B Series User's Guide
278