Example E-Mail Log - ZyXEL Communications VMG1312-B Series User Manual

The following table describes the fields in this screen.
Table 123 Maintenance > Logs Setting
LABEL
Syslog Setting
Syslog Logging
Mode
Syslog Server
UDP Port
E-mail Log Settings
Mail Server
System Log
Mail Subject
Security Log
Mail Subject
Send Log to
Send Alarm to
Alarm Interval
Allowed
Capacity Before
Email
Clear log after
sending mail
Active Log and Alert
System Log
Security Log
Send
immediate alert
Apply
Cancel

37.2.1 Example E-mail Log

An "End of Log" message displays for each mail in which a complete log has been sent. The
following is an example of a log sent by e-mail.
• You may edit the subject title.
• The date format here is Day-Month-Year.
• The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
Chapter 37 Log Setting
DESCRIPTION
The Device sends a log to an external syslog server. Select Enable to enable syslog logging.
Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local
File, the log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog
server and save it in a local file, select Local File and Remote.
Enter the server name or IP address of the syslog server that will log the selected categories
of logs.
Enter the port number used by the syslog server.
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via E-mail.
Type a title that you want to be in the subject line of the system log e-mail message that
the Device sends.
Type a title that you want to be in the subject line of the security log e-mail message that
the Device sends.
The Device sends logs to the e-mail address specified in this field. If this field is left blank,
the Device does not send logs via E-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack,
system error, or forbidden web access attempt occurs. Enter the E-mail address where the
alert messages will be sent. Alerts include system errors, attacks and attempted access to
blocked web sites. If this field is left blank, alert messages will not be sent via E-mail.
Specify how often the alarm should be updated.
Set what percent of the Device's log storage space can be filled before the Device sends a
log e-mail.
Select this to delete all the logs after the Device sends an E-mail of the logs.
Select the categories of system logs that you want to record.
Select the categories of security logs that you want to record.
Select log categories for which you want the Device to send E-mail alerts immediately.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG1312-B Series User's Guide
280