Table 107 Maintenance > Remote MGMT (continued)
LABEL
Trust Domain
Port
Apply
Cancel
30.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN
through the specified services.
Figure 138 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Table 108 Maintenance > Remote MGMT > Trust Domain
LABEL
Add Trust
Domain
IP Address
Delete
30.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Chapter 30 Remote Management
DESCRIPTION
Select the Enable check box for the corresponding services that you want to allow access to
the VMG from the trusted hosts configured in the Maintenance > Remote MGMT > Trust
Domain screen.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Apply to save your changes back to the VMG.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
VMG1312-Bx0D User's Guide
236