ZyXEL Communications VMG1312-B Series User Manual page 230

Figure 123 Parental Control Rule: Add/Edit Rule > Add Keyword
The following table describes the fields in this screen.
Table 92 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select the checkbox to activate this parental control rule.
Parental Enter a descriptive name for the rule.
Control Profile
Name
Home Network Select the LAN user that you want to apply this rule to from the drop-down list box. If you
User select Custom, enter the LAN user's MAC address. If you select All, the rule applies to all
LAN users.
Rule List In Home Network User, select Custom, enter the LAN user's MAC address, then click the
+ sign to enter a computer MAC address for this PCP. Up to five are allowed. Click the - sign
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the Device to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access (Authorized
access) or denied access (No access). Click the + sign above the time bar to add a new
time bar. Up to three are allowed.
Authorized Select this to allow access for the times defined above.
access
No access Select this to deny access for the times defined above.
Network Service
Network If you select Block, the Device prohibits the users from viewing the Web sites with the URLs
Service Setting listed below.
If you select Allow, the Device blocks access to all URLs except ones listed below.
Add new Click this to show a screen in which you can add a new service rule. You can configure the
service Service Name, Protocol, and Name of the new rule.
# This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name This shows the name of the rule.
Protocol:Port This shows the protocol and the port of the rule.
Chapter 20 Parental Control
VMG1312-B Series User's Guide
230