ZyXEL Communications VMG1312-B Series User Manual page 82

Table 10 Network Setting > Broadband > 3G Backup (continued)
LABEL DESCRIPTION
Username Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user name
above.
PIN A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN code,
you cannot use the 3G card.
If your ISP enabled PIN code authentication, enter the 4-digit PIN code (0000 for example)
provided by your ISP. If you enter the PIN code incorrectly, the 3G card may be blocked by
your ISP and you cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, leave this field blank.
Dial string Enter the phone number (dial string) used to dial up a connection to your service provider's
base station. Your ISP should provide the phone number.
For example, *99# is the dial string to establish a GPRS or 3G connection in Taiwan.
APN Enter the APN (Access Point Name) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 32 ASCII printable characters. Spaces are allowed.
Connection Select Nailed UP if you do not want the connection to time out.
Select on Demand if you do not want the connection up all the time and specify an idle
time-out in the Max Idle Timeout field.
Max Idle This value specifies the time in minutes that elapses before the Device automatically
Timeout
disconnects from the ISP.
Obtain an IP Select this option if your ISP did not assign you a fixed IP address.
Address
Automatically
Use the Select this option if the ISP assigned a fixed IP address.
following static
IP address
IP Address Enter your WAN IP address in this field if you selected Use the following static IP
address.
Obtain DNS Select this to have the Device get the DNS server addresses from the ISP automatically.
info
dynamically
Use the Select this to have the Device use the DNS server addresses you configure manually.
following static
DNS IP address
Primary Enter the first DNS server address assigned by the ISP.
DNS server
Secondary Enter the second DNS server address assigned by the ISP.
DNS server
Enable Email Select this to enable the e-mail notification function. The Device will e-mail you a
Notification notification when the 3G connection is up.
Mail Server Select a mail server for the e-mail address specified below.
If you do not select a mail server, e-mail notifications cannot be sent via e-mail. You must
have configured a mail server already in the Maintenance > Email Notification screen.
3G backup Type a title that you want to be in the subject line of the e-mail notifications that the Device
Send Email sends.
Title
Chapter 6 Broadband
VMG1312-B Series User's Guide
82