Modify 802.1X Settings; The Ethernet Wan Screen - ZyXEL Communications VMG1312-B Series User Manual

6.5.1 Modify 802.1X Settings

Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want
to edit. The screen shown next appears.
Figure 28 Network Setting > Broadband > 802.1x > Modify
The following table describes the labels in this screen.
Table 14 Network Setting > Broadband > 802.1x: Edit
LABEL
Active
Interface
EAP Identity
EAP method
Enable
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel

6.6 The Ethernet WAN Screen

Use the Ethernet WAN screen to convert LAN port number four as a WAN port and to restore it
back from a WAN to a LAN port for Ethernet Internet access.
Chapter 6 Broadband
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Select an interface to which the authentication applies.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select this to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG1312-B Series User's Guide
88