The 802.1X Screen - ZyXEL Communications VMG1312-B Series User Manual

6.5 The 802.1x Screen

You can view and configure the 802.1X authentication settings in the 802.1x screen. Click
Network Setting > Broadband > 802.1x to display the following screen.
Figure 27 Network Setting > Broadband > 802.1x
The following table describes the labels in this screen.
Table 13 Network Setting > Network Setting > 802.1x
LABEL
#
Status
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
Modify
Apply
Cancel
Chapter 6 Broadband
DESCRIPTION
This is the index number of the entry.
This field displays whether the authentication is active or not. A yellow bulb signifies that
this authentication is active. A gray bulb signifies that this authentication is not active.
This is the interface that uses the authentication. This displays N/A when there is no
interface assigned.
This shows the EAP identity of the authentication. This displays N/A when there is no EAP
identity assigned.
This shows the EAP method used in the authentication. This displays N/A when there is no
EAP method assigned.
This shows whether bidirectional authentication is allowed.
This shows the certificate used for this authentication. This displays N/A when there is no
certificate assigned.
This shows the Trusted CA used for this authentication. This displays N/A when there is no
Trusted CA assigned.
Click this icon to edit an item.
Click Apply to save your changes back to the Device.
Click Cancel to return to the previous configuration.
VMG1312-B Series User's Guide
87