Table of Contents
Advertisement
Chapter 27 Remote Management
27.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN
through the specified services.
Figure 118 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Table 95 Maintenance > Remote MGMT > Trust Domain
LABEL
Add Trust
Domain
IPv4 Address
IPv4 Mask
Delete
27.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 119 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
242
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
This field shows a trusted host subnet mask address.
Click the Delete icon to remove the trusted IP address.
VMG5313-B10A/-B30A Series User's Guide
Advertisement
Table of Contents
