ZyXEL Communications VMG1312-B Series User Manual page 226

The following table describes the labels in this screen.
Table 90 Security > MAC Filter
LABEL DESCRIPTION
MAC Address Filter Select Enable to activate the MAC filter function.
MAC Restrict Mode Select Allow to only permit the listed MAC addresses access to the Device. Select Deny
to permit anyone access to the Device except the listed MAC addresses.
Set This is the index number of the MAC address.
Allow Select Allow to enable the MAC filter rule. . The rule will not be applied if Allow is not
selected.
Host name Enter the host name of the wireless or LAN clients that are allowed access to the
Device.
MAC Address Enter the MAC addresses of the wireless or LAN clients that are allowed access to the
Device in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Chapter 19 MAC Filter
VMG1312-B Series User's Guide
226