The Upnp Screen - ZyXEL Communications VMG1312-B Series User Manual

Figure 54 Static DHCP: Add/Edit
The following table describes the labels in this screen.
Table 32 Static DHCP: Add/Edit
LABEL
Active
Group Name
Select Device Info
MAC Address
IP Address
Apply
Cancel

8.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 128
Chapter 8 Home Networking
DESCRIPTION
Select this to activate the connection between the client and the Device.
Select the interface group name for which you want to configure static DHCP settings.
See Chapter 15 on page 197
Select a device or computer from the drop-down list or select Manual Input to manually
enter a device's MAC address and IP address in the following fields.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
VMG1312-B Series User's Guide
for how to create a new interface group.
134