Table 114 Maintenance > Remote MGMT > Trust Domain (continued)
LABEL
IP Address
Delete
32.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the Add Trust
Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the following screen.
Figure 146 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 115 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL
IP Address
Apply
Cancel
Chapter 32 Remote Management
DESCRIPTION
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the VMG from the WAN.
Click Apply to save your changes back to the VMG.
Click Cancel to restore your previously saved settings.
VMG3925-B10C/B30C User's Guide
257